Don't feel insulted by this, cuz I did it for about an hour once... Is your Palm HotSync Manager running and tying up the serial port? Also, if you are using SerialB, do you have it set in the BIOS for Infrared (thereby disabling the physical port)? Nate ""Ajay Pandey"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am using a roll-over cable.. > > > ""Ajay Pandey"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi, > > I just bought a used Cisco 2520 router and as per instructions, I connect > > the console port using the RJ-45 cable to a DB9 (I also tried connecting > it > > to a DB25) and connected it into my computer running Win Me. I setup the > > hyperterminal according to the setting, Baud rate etc., given on the > online > > documentation and it said it is connected. > > But there was no CLI of the router, also it remained connected even if I > > powered off the router. > > > > Please help me in troubleshooting this as I am new to Cisco hardware. > > > > Thanks a lot. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9932&t=9932 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
