If I remember correctly you have to enable "redundancy" and "high
availability" features.
Here are some links:
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/tech/hafc6_wp.htm
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/redund.htm
Hope that helps.
Aurelian Georgescu
-----Original Message-----
From: Ronald James [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 26, 2001 11:03 PM
To: [EMAIL PROTECTED]
Subject: 6509 MSFC problem [7:10057]
Hi,
I have two 6509s (A&B) with two MSFC on each running mslp and hsrp. Did
anyone heard about there's problem running mslp and hsrp with four MSFC
failover? the problem is that there are only two MSFC failover but don't
apply to all four, if you have experience on this problem, please help! The
other problem I've had is that, assuming there are only two MSFC running
active & passive mode, it shows status is 'others' instead of 'ok', anyone
knows what's happening? My guess is on the active node(Switch A), hsrp
already failover to the passive(Switch B) one, so layer 3 is fuctioning.
However, the Switch A still passing traffic to the associated MSFC, so it
causes traffic jam in Switch A, but in fact the traffic should go through
Switch B instead. Please suggest...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10116&t=10057
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
