Hi all
I just got a 2509 and configured it as an access server and the following
problems have come up :
I connected all the eight ports of the octal cable to various routers,
the ports 1,2 and 3 are not working but ports 4 through 8 work fine. I have
interchanged the routers i.e. connected other routers which I could telnet
in to using ports 4 through 8 to the ports 1,2 and 3( of course I changed
the configuration in the access server too) and confirmed that the problem
is with the access server. The routers that do not work with 1,2 and 3 work
fine with 4,5,6,7 and 8 ( with proper configuration ).
Can some body help me with this problem ? I very much doubt that this is a
physical problem because the octal cable is new.
You can telnet in to my 2509 by using the ip address 24.181.148.225 password
123 and abc, and check the configuration.
Anwar
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Anwar Ladhani
Sent: Tuesday, July 03, 2001 12:35 PM
To: [EMAIL PROTECTED]
Subject: test [7:10853]
test
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10869&t=10869
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
