Akshay,
Temporary increase output buffer on interface with "hold-queue out xxx",
but make sure you are calculating MaxBw correctly. Also if possible provide
outputs from following commands :
- show interface ( of your output drop intf )
- show buffers
- show mem
thanks,
rahul.
""Akshay Parikh"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> We have a satellite gateway to our upstream provider. The bandwidth for us
> is 5.6Mbps for Outgoing traffic (upstream from our end) & 28Mbps Incoming
> traffic (downstream on our end).
> This circuit is terminated on a HSSI port on Cisco 7513. Offlate, we are
> facing a problem in our outgoing traffic.
> We are observing a lot of Output Drops on our HSSI port.
> This is happening even when my outbound traffic is 3.5Mbps - 4Mbps, which
is
> very less than the max limit.
> IOS version is 12.0(5)
>
> Thanks in advance
> Akshay
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11232&t=11230
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
