Here you go..
http://www.cisco.com/warp/public/63/queue_drops.html
C5vetteboy
--- Rahul Kachalia wrote:
> Akshay,
>
> Temporary increase output buffer on interface
> with "hold-queue out xxx",
> but make sure you are calculating MaxBw correctly.
> Also if possible provide
> outputs from following commands :
> - show interface ( of your output drop intf )
> - show buffers
> - show mem
>
> thanks,
> rahul.
>
> ""Akshay Parikh"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hello,
> >
> > We have a satellite gateway to our upstream
> provider. The bandwidth for us
> > is 5.6Mbps for Outgoing traffic (upstream from our
> end) & 28Mbps Incoming
> > traffic (downstream on our end).
> > This circuit is terminated on a HSSI port on Cisco
> 7513. Offlate, we are
> > facing a problem in our outgoing traffic.
> > We are observing a lot of Output Drops on our HSSI
> port.
> > This is happening even when my outbound traffic is
> 3.5Mbps - 4Mbps, which
> is
> > very less than the max limit.
> > IOS version is 12.0(5)
> >
> > Thanks in advance
> > Akshay
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11243&t=11230
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]