I'm porbably a day late & a dollar short, but I thought the 2620 & 2621's
were the only adjustable Ethernets (10 or FE, Full or Half). Could this be
the router IOS. I know the IOS I received in my 2621 (11.3 I believe) did
not allow for Ethernet interface changes like 12.0x
Phil
----- Original Message -----
From: "shella kevin"
To:
Sent: Sunday, July 08, 2001 9:00 AM
Subject: Re: duplex mismatch [7:11257]
> ports speed should be same on both end. that i know :-)
>
> >From: "Moahzam Durrani"
>
> >Reply-To: "Moahzam Durrani" >To: [EMAIL PROTECTED] >Subject: duplex
> mismatch [7:11257] >Date: Sat, 7 Jul 2001 14:26:36 -0400 > >i have an
> 2610 router that im conbnecting to my core switch 6509. I have set >the
> port on 2610 to full-duplex and ont the core set the port to full duplex
> >and speed = 10 . when i connect both devices I get message indicating a
> >mismatchduplex and my 2610 starts rebooting and continues till i
> disconnect >it from the switch. the same thing happens wh i set the ports
> misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ------------------------------------------------------------------------
>
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11321&t=11257
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
