check to see if there's a "k" switch on the menu
screen on the first menu. that option will give you
command line access to the 1924-en switch.
oddy
--- Circusnuts wrote:
> If you have the Cisco Press BCMSN book, it covers
> all these labs & more.
> You will be limited with the 1924's because of the
> port speeds. I have
> heard there is a manual (non-menu driven) side to
> the Enterprise IOS, but
> have never found out how to make appear & @ times
> questioned it's existence
> :o)
>
> Phil
>
> ----- Original Message -----
> From: "charles paver"
> To:
> Sent: Sunday, July 08, 2001 8:55 AM
> Subject: catalyst 1924 switch [7:11315]
>
>
> > Hi. My switch is only menu driven, with the
> enterprise sware. I wanted
> > to know if I can get or how I can get the CLI to
> work on it. Also, I
> > have 2 1924's and wanted to cascade them with
> either fiber or cross over
> > cable. Any special configuration needed? Thanks
> again!
> >
> >
>
------------------------------------------------------------------------
> >
> > Get your FREE download of MSN Explorer at
> http://explorer.msn.com
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11328&t=11315
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
