I just bought some 1900 switches. I can get the IOS to appear! ;-) I think
you have to have the enterprise edition.
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1998
All rights reserved.
Enterprise Edition Software
Ethernet Address: 00-B0-64-26-79-40
-------------------------------------------------
1 user(s) now active on Management Console.
User Interface Menu
[M] Menus
[K] Command Line
[I] IP Configuration
Enter Selection: K
CLI session with the switch is open.
To end the CLI session, enter [Exit].
>en
#?
Exec commands:
clear Reset functions
configure Enter configuration mode
copy Copy configuration or firmware
delete Reset configuration
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
menu Enter menu interface
ping Send echo messages
reload Halt and perform warm start
session Tunnel to module
show Show running system information
terminal Set terminal line parameters
vlan-membership VLAN membership configuration
Priscilla
At 09:24 AM 7/8/01, Circusnuts wrote:
>If you have the Cisco Press BCMSN book, it covers all these labs & more.
>You will be limited with the 1924's because of the port speeds. I have
>heard there is a manual (non-menu driven) side to the Enterprise IOS, but
>have never found out how to make appear & @ times questioned it's existence
>:o)
>
>Phil
>
>----- Original Message -----
>From: "charles paver"
>To:
>Sent: Sunday, July 08, 2001 8:55 AM
>Subject: catalyst 1924 switch [7:11315]
>
>
> > Hi. My switch is only menu driven, with the enterprise sware. I wanted
> > to know if I can get or how I can get the CLI to work on it. Also, I
> > have 2 1924's and wanted to cascade them with either fiber or cross over
> > cable. Any special configuration needed? Thanks again!
> >
> > ------------------------------------------------------------------------
> >
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11526&t=11315
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]