I do not have a 2924, but this is the same problem I had with my 1900's.
You need a "null" modem cable to attach to the 1900's. You might try that
with the 2924. Check the Archives on this thread.
David Toalson
816-701-4142
> ----------
> From: [EMAIL PROTECTED][SMTP:[EMAIL PROTECTED]]
> Reply To: [EMAIL PROTECTED]
> Sent: Saturday, July 07, 2001 2:49 PM
> To: [EMAIL PROTECTED]
> Subject: When booting up i get ATQOHO [7:11261]
>
> Hello,
> I want to thank all who responded to my problem of accessing through the
> console port. the problem was a background program that tied up the COM1
> port.
> Now when i access my 1924 switch , it responds with the letters "ATQOHO"
> and
> "ATQOZO" and just sits there. I am wondering if the flash is corupted and
> i
> need to reload the operating system or if i have a bigger problem. I have
> looked at the cisco site and nothing came up regaurding the problem.
> thank you for your time,
> Joe gearhart, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11430&t=11261
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
