I've posted a question about this problem that I am having yesterday,
but I still have not been able to resolve this problem.
Here is what I've got: 2900 connected to 5505A which connected to
another 5505B. From 2900 I can ping 5505A's RSM and I can ping sc0 and
RSM on 5505B.
Default gateway on 2900 is a port on 5505 that I am connected to.
Default gateway for sc int on 5505A is its RSM. Both of the 5505s are
VLAN 1, 2900 is config for VLAN 76. When I do "sh vlan" on 5505A, it
is showing VLAN 76 active, connected to 4/8. 4/8 is up.
When I do traceroute from 2900 to sc on 5505A it goes to its gateway adn
then times out, but I can ping RSM just fine. And subnet network that I
got config for VLAN 76 is added to the RSM on 5505A routing table. Any
ideas? Any input is appreciated.
Thanks a lot.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11761&t=11761
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
