Sounds like #line con 0 has "no exec" & maybe not the intended "no exec
time-out." Reboot the router & get it into "confreg 0x2142" (regular boot
mode with no NVRAM access) or "o/r0x41" (boot mode version). You will be
dropped @ the setup mode & can go from there.
All the best !!!
Phil
----- Original Message -----
From: "Dennis Laganiere"
To:
Sent: Tuesday, July 10, 2001 11:04 PM
Subject: Dead 2501 [7:11865]
> I just got a 2501 off of ebay and it seems to boot up OK, but it won't
> accept any commands from the keyboard. The console speed is right,
> otherwise I wouldn't be able to see the boot process. I was able to issue
a
> control-break and it started at the ">" prompt, but even there, no
keyboard.
> I hooked up another router to the console cable to make sure it wasn't the
> PC, but that router worked fine.
>
> Any ideas?
>
> --- Dennis
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11883&t=11865
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
