You've got a line quality problem. Since you can't drop the speed, I'd
suggest ordering a new pair from the ILEC. Additionally, you can try
hooking up the router at the NID to eliminate Premise wiring as the possible
cause. Does your DSLAM have a built in test head? We use the Lucent
Stinger DSLAM's and have the ability to do a TDR and simple electronic tests
on the line remotely.
Ejay Hire
Sr. Provisioning Engineer
Broadslate Networks
http://www.broadslate.net
-----Original Message-----
From: Mohammed Saro [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 12, 2001 7:50 AM
To: [EMAIL PROTECTED]
Subject: Mawhoob [7:12107]
i have a problem with one DSL customer with a speed of 128 kbps conected to
my
company through 2 exchanges via copper wires 0.4 mm thick the line is up
and
the protocols goes up and down i checked the H/W it is ok but the physical
line has input errors and crc's whta is the solution
Best Regards,
Mohammed Saro
Network Engineer
GEGA NET
Tel: +202-4149771 Ext:111
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12127&t=12107
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
