Did you have the phone company run a line test? What is the loop length
between the two?
Is it a dry pair? You should be able to check the line quality through the
DSL modem.
You can also mess with the TX power settings.
There other question is if it ever worked. If not there may be a short or
crossover on the cable.
DSL troubleshooting is fun for everyone!
Good luck.
-John
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mohammed Saro
Sent: Thursday, July 12, 2001 7:50 AM
To: [EMAIL PROTECTED]
Subject: Mawhoob [7:12107]
i have a problem with one DSL customer with a speed of 128 kbps conected to
my
company through 2 exchanges via copper wires 0.4 mm thick the line is up
and
the protocols goes up and down i checked the H/W it is ok but the physical
line has input errors and crc's whta is the solution
Best Regards,
Mohammed Saro
Network Engineer
GEGA NET
Tel: +202-4149771 Ext:111
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12126&t=12107
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
