I don't know the answer but you might look up the timeout command on the PIX
(if that's what you have) and see if that helps.
Allen
----- Original Message -----
From: "James Haynes"
To:
Sent: Thursday, July 12, 2001 9:48 AM
Subject: NAT Translations and Time Left [7:12133]
> I'm performing NAT translations on one of our network connections and all
is
> fine except that the server the people are connecting to is having an
> application issue. This causes them to time out waiting for a logon. They
> then try to initiate another connection and the same process occurs. If I
do
> a "show ip nat translations verbose" I can see the individual connections
> and the NAT having taken place (doing an overload on the address space)
and
> then these connections remain open for 24 hours. As the users keep
> attempting to open new connections the old connections remain up.
>
>
> tcp XXX.XXX.XXX.XXX:1194 XXX.XXX.XXX.XXX:1194 XXX.XXX.XXX.XXX:23
> XXX.XXX.XXX.XXX:23
>
> create 22:12:59, use 22:12:37, left 01:47:22,
>
> Is there a NAT command that let's me specify how long a connection can
> remain open? Say for instance, 2 hours instead of 24?
>
> --
> James Haynes
> Network Architect
> Cendant IT
> A+,MCSE,CCNA,CCDA,CCNP,CCDP,
> CQS-SNA/IP
>
>
> --
> James Haynes
> Network Architect
> Cendant IT
> A+,MCSE,CCNA,CCDA,CCNP,CCDP,
> CQS-SNA/IP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12144&t=12133
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
