> HI All
>
> I was doing some study last night and I tried to implement OSPF as my
> routing protocol. I have 2 routers on the same ethernet LAN (with
> configs for a wide area network) and I was trying to get the routers
> to use OSPF to update and distribute the respective routers route
> tables. However, this did not work.
>
> 10.10.30.0 |---------| int e0 10.10.10.1
> 255.255.255.0 int fast 0 |---------------| 10.10.20.0
> ------------------------|
> |---------------------------------------------------------------------
> ---------------------|
> |---------------------------------------------
> int bri0 |---------|
> |_________| int bri0
> router 1603
> router 1720
>
> This is my setup, I know very cheap. I can get the routers to ping
> each other and also sh cdp info, but I cant see route updates.
>
> This is the command I entered on both
>
> 1603: 1720:
> router ospf 10 router ospf 10
> network 10.10.10.0 network 10.10.10.0
> network 10.10.30.0 network 10.10.20.0
>
> I checked the sh ip route and could not see anything indicating the
> routes were known....
>
> Any help ???
>
> Thanks for your time. The group has been going really well, lots of
> questions and answers coming,.
>
> John
> Sydney Australia
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12241&t=12241
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
