You may need to check your route-map to see if it
allows 192.168.25.5
regards,
suaveguru
--- Leonardo Borda wrote:
> Hello People:
>
> Actually I am using dynamic NAT to allow my
> intranet users access the
> internet. The problem is when a configure a static
> NAT from external Ip to
> the internal IP, It does not work. But the funny
> thing is it does not work
> only to a specific IP. Take a look at my
> configuration. I really do not know
> why!!!
>
> !
> ip nat pool BRASIL netmask 255.255.255.192
> ip nat inside source route-map nonat pool BRASIL
> overload
> ip na
> !
>
>
> when i put that configuration it does not work!
> ip nat inside source static 192.168.25.5
>
>
> If I change this to
>
> ip nat inside source static 192.168.25.10
> It works!
>
> The default gateway is correct from theirs....
>
> thanks!
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12451&t=12287
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
