yes u just need a
async-bootp dns-server
command folowed by yr dns srv ip
and u are done
and remove the dns suffix from client as welll
Best Regards
Have A Good Day!!
Farhan Ahmed
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network Engineer
Mideast Data Systems Abudhabi Uae.
-----Original Message-----
From: JR Van Noy [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 9:31 PM
To: [EMAIL PROTECTED]
Subject: Re: Remote Access [7:12958]
The clients are getting assigned from a local pool using ppp...They are
authenticated against a securid server using tacacs+. Once they are
authenticated we have them type ppp default at the router prompt to
finish the connection. Below is the config with my ip info omitted.
Thanks for everyone's help,
JR
ip domain-list *
ip domain-list *
ip domain-name *
ip name-server x.x.x.x
ip name-server x.x.x.x
ip name-server x.x.x.x
ip name-server x.x.x.x
ip address-pool local
ip local pool local 'range'
interface Group-Async1
ip unnumbered Loopback0
no ip directed-broadcast
encapsulation ppp
ip tcp header-compression passive
dialer in-band
dialer idle-timeout 900
dialer wait-for-carrier-time 60
dialer-group 1
async dynamic address
async dynamic routing
async mode interactive
no snmp trap link-status
peer default ip address pool local
no fair-queue
group-range 1 24
line 2 24
exec-timeout 30 0
logout-warning 120
script dialer cisco-default
accounting connection test
login authentication async-tacacs+
modem Dialin
modem autoconfigure discovery
terminal-type vt100
"Hire, Ejay" wrote:
>
> It is possible to do this, depending on how your clients are getting the
Ip
> addresses. From your statements I assume the access sever is handing them
> out via PPP, but where is the router getting the IP's? From a local pool
> (most likely), a radius server, a local DHCP server, or ?
>
> Additionally, can you post or e-mail me a copy of your config.
>
> -----Original Message-----
> From: JR Van Noy [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, July 19, 2001 11:58 AM
> To: [EMAIL PROTECTED]
> Subject: Remote Access [7:12958]
>
> I have a 3640 set up with async dial in for remote users. The laptops
> must be configured to to append domain suffixes in order resolve host
> names.
>
> Is it possible to have this information sent from the router? I do have
> the ip domain-list/name commands configured, but can I set this for the
> async-group, and pass it down when a user connects and receives ip
> information?
>
> thanks for your help,
>
> JR
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of Farhan Ahmed.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12981&t=12958
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
