use redistribute command.. -----Original Message----- From: pat [mailto:[EMAIL PROTECTED]] Sent: Friday, July 20, 2001 6:51 AM To: [EMAIL PROTECTED] Subject: routing issue with ISDN backup [7:13045] Hello everyone: I have some routing issue here. I have central office with a core router sitting behind the PIX. All branch office (remote) routers connect to central router using frame relay & ISDN as back up. Each branch office (having 1 Serial, 1 ISDN, 1 Eth Int) should be able get to any other branch office & to Internet through PIX. All IPs used will be private & PIX will be doing NAT. I am planning on having EIGRP to route between all routers over frame relay & floating static route to trigger ISDN if FR goes down. This floating static route will be something like ip route 0.0.0.0 0.0.0.0 10.0.0.1 200 (10.0.0.1 will be IP of central router) In each branch office router EIGRP will have Ethernet & serial networks in it. This will make all internal routing fine when the network is on FR. But how do I route Internet traffic to core router so that it can send to PIX? I am already using default static route to core router, which I want to be used only when FR is down. Is there any way in EIGRP to propagate default route through network from core router? Thanks a lot, pat __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13068&t=13045 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]