rather than us supply you with working configs, why don't you tell us what
you have done? what troubleshooting have you performed? on the frame switch
have you checked your frame routes? are you sure they are correct? do you
have the DCE end of the cable attached to the interface where the clock rate
is configured? this may not be the same as the interface where the frame
intf-type DCE is configured.
if your show frame pvc is indicating deleted, your configured DLCIs are not
correct. make sure what you have configured on the router links match what
is configured on the frame switch link.
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Albert Lu
Sent: Sunday, July 22, 2001 5:56 AM
To: [EMAIL PROTECTED]
Subject: Working Frame Relay Point-to-Point Config [7:13245]
Hello Group,
Could someone point me to (or send me) a working config for a Frame switch
and routers attached to it, using point-to-point connections. I'm currently
stuck on this for my routers, as the PVCs are there but in a deleted state.
I probably should have included my configs in this email, but I'm not at my
routers at the moment, and I'm sure it's something simple that I have
missed.
Thanks for your help.
Albert
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13249&t=13245
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
