Hey, I am having trouble with VoFR. I have a small lab setup with a 2600 as
a frame switch and two routers (2600 and 3600) with FXS ports. I can get
VoIP to work just fine. For VoFR I changed the dial-peer to VoFR and I
changed the destination pattern to use the serial interface and the local
DLCI. Other than that the configs are the same (just a plain Jane VoIP
config). Is there something obvious that I am missing?
dial-peer voice 100 vofr
port 1/0/0
destination-pattern 5000
session target serial0/0 120
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13434&t=13434
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
