I am suprised that the IOS let you put a "port statment" under a VOFR dial
peer. Those are only for POTS peers. Take it out and it might work.
Tony M.
#6172
----- Original Message -----
From: Matt
To:
Sent: Monday, July 23, 2001 5:05 PM
Subject: VoFR [7:13434]
> Hey, I am having trouble with VoFR. I have a small lab setup with a 2600
as
> a frame switch and two routers (2600 and 3600) with FXS ports. I can get
> VoIP to work just fine. For VoFR I changed the dial-peer to VoFR and I
> changed the destination pattern to use the serial interface and the local
> DLCI. Other than that the configs are the same (just a plain Jane VoIP
> config). Is there something obvious that I am missing?
>
> dial-peer voice 100 vofr
> port 1/0/0
> destination-pattern 5000
> session target serial0/0 120
>
> Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13439&t=13434
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
