If you are using a windows 2000 machine, you may need to upgrade the ios
version on the switch. I ran into this problem on some catalyst switches
that we are uing in our network. This a documented bug that you can find
using bug tracker.
Thanks
Stan Rossetti
NASA - PriSMS
Advanced Technology Group
IP Phone: (256) 961-7097
Voice: (256) 544-5031
Email: [EMAIL PROTECTED]
Beeper: 544-1183 pin 0112
CCDA, CCNA, CCSE
-----Original Message-----
From: Arun [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 24, 2001 4:51 AM
To: [EMAIL PROTECTED]
Subject: Re: Plugging into console port rebooted switch ... [7:13478]
Hi
Is it rebooted the switch when u started the KeaTerm term software or it
just rebooted the switch when u plugged in the console cable.If it rebooted
when u started the KeaTerm term try using the windows hyperterminal and see
if the problem occurs again .I think it should not
Regards
""evans jason"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> recently i plugged a laptop using KeaTerm term em software into the
console
> port of a 2924 switch and it immediately rebooted the switch. i repeated
the
> operation a 2nd time making sure i didn't have a reload command in the
> waiting and it happened again. has this every happened to anyone? if so,
any
> ideas on how to not let it happen again - this switch is a production
switch
> w/ all the NT servers.
>
> thanks,
>
> jason
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13492&t=13478
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
