You guessed it, you need two ethernet interfaces. a 2514 or a 1605 are the
ceapest way. A 2611 or 2621 will also do the job.
Neil Schneider
CCSI CCNP
""Greg Macaulay"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I need some assistance with setting up my 2501 with my cable modem. I
know
> I'm missing something very obvious -- but attribute my oversight to my
age!
>
> (1) I configured the e0 port with ip address dhcp.
>
> (2) I connected the cat5 cable from the cable modem to the e0 port.
>
> (3) Now I know I need to connect the router to my hub -- but how?? --
since
> there is only (1) ethernet port on a 2501?? Do I need a 2514 (or some
other
> router that has more than one ethernet port?
>
> Again -- I know I'm missing the obvious -- but any help (with or without
> flaming would be appreciated! -- Besides we old folks don't "burn" well!)
>
> Thanks to all,
>
> Greg Macaulay
> Oldest CCNP/CCDP on Earth
> Lifetime Member of AARP
> Retired Attorney/Law Professor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13632&t=13626
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
