Can't you use a 10BaseT Transceiver in the AUI port?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Allen May
Sent: Tuesday, July 24, 2001 3:11 PM
To: [EMAIL PROTECTED]
Subject: Re: Cable modems & 2501s?? [7:13626]
Ya know what....never mind...just looked up 2501 and it's 2 serial ports &
and AUI. My bad.
----- Original Message -----
From: "Greg Macaulay"
To:
Sent: Tuesday, July 24, 2001 4:49 PM
Subject: Cable modems & 2501s?? [7:13626]
> Hi all,
>
> I need some assistance with setting up my 2501 with my cable modem. I
know
> I'm missing something very obvious -- but attribute my oversight to my
age!
>
> (1) I configured the e0 port with ip address dhcp.
>
> (2) I connected the cat5 cable from the cable modem to the e0 port.
>
> (3) Now I know I need to connect the router to my hub -- but how?? --
since
> there is only (1) ethernet port on a 2501?? Do I need a 2514 (or some
other
> router that has more than one ethernet port?
>
> Again -- I know I'm missing the obvious -- but any help (with or without
> flaming would be appreciated! -- Besides we old folks don't "burn" well!)
>
> Thanks to all,
>
> Greg Macaulay
> Oldest CCNP/CCDP on Earth
> Lifetime Member of AARP
> Retired Attorney/Law Professor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13642&t=13626
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
