Yes.. I tried this before, but it come out these errors.. what's wrong??/
access_server(config)#username "sim" password "simiscute"
callback-dialstring 999999
% Overly long Password truncated after 25 characters
access_server(config)#username sim password simiscute callback-dialstring
999999
% Overly long Password truncated after 25 characters
access_server(config)#username sim password simiscute [callback-dialstring
999999]
% Overly long Password truncated after 25 characters
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Monday, July 30, 2001 5:23 PM
To: [EMAIL PROTECTED]; Sim, CT (Chee Tong)
Subject: RE: how to configure callback for 2 numbers [7:14121]
Specify the call back number in the username configuration:
username "yourname" password "yourpassword" callback-dialstring 888888
username "yourmate" password "hispassword" callback-dialstring 777777
CM
-----Original Message-----
From: "[EMAIL PROTECTED]" on behalf of
"Sim, CT (Chee Tong)"
Sent: 30 July 2001 08:04
To: "[EMAIL PROTECTED]"
Subject: how to configure callback for 2 numbers [7:14121]
> ----------
> From: Sim, CT (Chee Tong)[SMTP:[EMAIL PROTECTED]]
> Sent: Monday, July 30, 2001 9:04:53 AM
> To: [EMAIL PROTECTED]
> Subject: how to configure callback for 2 numbers [7:14121]
> Auto forwarded by a Rule
>
Dear all,
I want to make my access-server to callback my home phone no 888-888 and my
colleage phone no 777-777, once we use these two number to dial to the
access-server, , after verification, the access server will cut the line and
call back, no other number can be callbacked.
Part of my config is as follow, Please tell me what else I need to configure
in order to make it work. eg callback-dialstring and etc
interface Async1
ip unnumbered Ethernet0
encapsulation ppp
no logging event subif-link-status
async dynamic address
async mode interactive
peer default ip address dhcp
ppp callback accept
ppp authentication pap
!
line 1
password 7 00059805050058
autoselect ppp
login local
modem InOut
length 0
transport input all
speed 115200
flowcontrol hardware
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14132&t=14121
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
