try this
dont paste
username caller1 callback-dialstring 1111 password caller1
username caller2 callback-dialstring 2222 password caler2
chat script "dialout" ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 30
CONNECT \c
interface loopback1
ip address 192.168.1.1
interface group-async 1
encapsulation ppp
ip unnumbered interface loopback1
ppp authentication pap
async mode dedicated
peer default ip address pool ip-pool
ppp callback accept
group range 1 1
ip pool ip-pool 192.168.1.2 192.168.1.2
line 1
modem inout
no exec
script callback dialout
transport input all
modem autoconfigure discovery
stopbits 1
flow control hardware
u need to have ios 11.3 2 t or higher
4 win95 callback
send me debug ppp negotioation, authentication
if u have any problem
let me know
Best Regards
Have A Good Day!!
*******************************************
Farhan Ahmed*
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network Engineer
Mideast Data Systems Abudhabi Uae.
*******************************************
Privileged/Confidential Information may be contained in this message or
Attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
Conclusions and other information in this message that do not relate to the
Official business of this company shall be understood as neither given nor
Endorsed by it.
> -----Original Message-----
> From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
> Sent: Monday, July 30, 2001 1:56 PM
> To: [EMAIL PROTECTED]
> Subject: RE: how to configure callback for 2 numbers [7:14121]
>
>
> Yes.. I tried this before, but it come out these errors..
> what's wrong??/
>
>
> access_server(config)#username "sim" password "simiscute"
> callback-dialstring 999999
> % Overly long Password truncated after 25 characters
> access_server(config)#username sim password simiscute
> callback-dialstring
> 999999
> % Overly long Password truncated after 25 characters
> access_server(config)#username sim password simiscute
> [callback-dialstring
> 999999]
> % Overly long Password truncated after 25 characters
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> Sent: Monday, July 30, 2001 5:23 PM
> To: [EMAIL PROTECTED]; Sim, CT (Chee Tong)
> Subject: RE: how to configure callback for 2 numbers [7:14121]
>
>
>
> Specify the call back number in the username configuration:
>
> username "yourname" password "yourpassword" callback-dialstring 888888
> username "yourmate" password "hispassword" callback-dialstring 777777
>
> CM
>
>
> -----Original Message-----
> From: "[EMAIL PROTECTED]" on behalf of
> "Sim, CT (Chee Tong)"
> Sent: 30 July 2001 08:04
> To: "[EMAIL PROTECTED]"
> Subject: how to configure callback for 2 numbers [7:14121]
>
>
>
> > ----------
> > From: Sim, CT (Chee Tong)[SMTP:[EMAIL PROTECTED]]
> > Sent: Monday, July 30, 2001 9:04:53 AM
> > To: [EMAIL PROTECTED]
> > Subject: how to configure callback for 2 numbers [7:14121]
> > Auto forwarded by a Rule
> >
> Dear all,
>
> I want to make my access-server to callback my home phone no
> 888-888 and my
> colleage phone no 777-777, once we use these two number to dial to the
> access-server, , after verification, the access server will
> cut the line and
> call back, no other number can be callbacked.
>
> Part of my config is as follow, Please tell me what else I
> need to configure
> in order to make it work. eg callback-dialstring and etc
>
> interface Async1
> ip unnumbered Ethernet0
> encapsulation ppp
> no logging event subif-link-status
> async dynamic address
> async mode interactive
> peer default ip address dhcp
> ppp callback accept
> ppp authentication pap
> !
> line 1
> password 7 00059805050058
> autoselect ppp
> login local
> modem InOut
> length 0
> transport input all
> speed 115200
> flowcontrol hardware
>
>
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of Farhan Ahmed.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14168&t=14121
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
