All,
I cannot find any cisco docs that describes the meaning and signifigance of
the five attributes after at the end of the output of sh int hssi x
(LC=down CA=up TM=down LB=down TA=up) Note that only CA goes down when
the interface goes down. I have pasted the output below:
Thanks,
David
Hssi1/0 is up, line protocol is up
Hardware is M1T-HSSI-B
Description:
MTU 4470 bytes, BW 45045 Kbit, DLY 200 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, crc 16, loopback not set
Keepalive set (10 sec)
LMI enq sent 5170, LMI stat recvd 5171, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/256, broadcasts sent/dropped 12036/0, interface
broadcasts 11169
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 14:37:00
Queueing strategy: fifo
Output queue 0/40, 24 drops; input queue 0/75, 0 drops
5 minute input rate 122000 bits/sec, 22 packets/sec
5 minute output rate 29000 bits/sec, 14 packets/sec
3386217 packets input, 2679347685 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 parity
1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
2950653 packets output, 554782309 bytes, 0 underruns
0 output errors, 0 applique, 30 interface resets
0 output buffer failures, 0 output buffers swapped out
32 carrier transitions LC=down CA=up TM=down LB=down TA=up
LA=down
Thanks,
David
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14216&t=14216
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
