TM = {up|down}
CA = {up|down}
LC = {up|down}
Status signals for the HSSI line, which include up and down indicators for
test mode (TM), carrier available (CA), and loopback control (LC).
HTH
steve
>From: "David Scott"
>Reply-To: "David Scott"
>To: [EMAIL PROTECTED]
>Subject: Sh int hssi x output question [7:14216]
>Date: Mon, 30 Jul 2001 13:37:38 -0400
>
>All,
>
>
>I cannot find any cisco docs that describes the meaning and signifigance of
>the five attributes after at the end of the output of sh int hssi x
>(LC=down CA=up TM=down LB=down TA=up) Note that only CA goes down when
>the interface goes down. I have pasted the output below:
>
>Thanks,
>
>David
>
>Hssi1/0 is up, line protocol is up
> Hardware is M1T-HSSI-B
> Description:
> MTU 4470 bytes, BW 45045 Kbit, DLY 200 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation FRAME-RELAY, crc 16, loopback not set
> Keepalive set (10 sec)
> LMI enq sent 5170, LMI stat recvd 5171, LMI upd recvd 0, DTE LMI up
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 1023 LMI type is CISCO frame relay DTE
> FR SVC disabled, LAPF state down
> Broadcast queue 0/256, broadcasts sent/dropped 12036/0, interface
>broadcasts 11169
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters 14:37:00
> Queueing strategy: fifo
> Output queue 0/40, 24 drops; input queue 0/75, 0 drops
> 5 minute input rate 122000 bits/sec, 22 packets/sec
> 5 minute output rate 29000 bits/sec, 14 packets/sec
> 3386217 packets input, 2679347685 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 parity
> 1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 2950653 packets output, 554782309 bytes, 0 underruns
> 0 output errors, 0 applique, 30 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 32 carrier transitions LC=down CA=up TM=down LB=down TA=up
>LA=down
>
>
>Thanks,
>
>David
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14345&t=14216
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
