I know that the Sup III cards for the 5500 series use a straight Ethernet
patch cord rather than the standard rolled console cable. I don't know about
the 6509. Try going from the AUX port of your router to the switch with
first a rolled cable - if that fails then try a straight.
> -----Original Message-----
> From: cisco skin [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 01, 2001 1:57 PM
> To: [EMAIL PROTECTED]
> Subject: Terminal server and Cat6509 [7:14535]
>
>
> I'm having a piss os a time with a 2620 with a 16port Asych
> module/octal
> cables attached.... plugged into my console port on a 6509.
> Cant't get the
> bastard to work... tried with just the console, than even
> attached sl0 with
> an IP address... still nada. I'm sure I have the right line
> by doing a "sh
> line".... Any help would be much appreciated. I've even used
> this link in
> case someone tries to point it out:
> :http://www.cisco.com/warp/customer/793/access_dial/comm_server.html
>
> Thanks
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14545&t=14535
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
