Hi, I had a similar issue on a 3640 also. I tried to do a remote IOS upgrade and there were issues. The easiest way out of your situation is if you have a pcmcia card with the flash you want. This I think would be the easiest and quickest way to recover your IOS. If you don't have this card, I do not believe you can do a ftfpdnld on a 3600 but don't quote me on this. Otherwise, you need to troubleshoot what is wrong with your xmodem configs. It may be as simple as having the wrong type cable between your computer and router. I would also run the "dev" command to see what you got in your router. If time is an issue, you could swap your flash with another router to get your customer up and work on the suspect flash in your shop. I hope this helps and wish you luck. Let me know what happens... "Uttam Majumdar" wrote in message ... >Hi, > >Do this - > >rommon 1> tftpdnld >rommon 2> set >rommon 3> IP_ADDRESS=A.B.C.D (IP address of the enet of router) >rommon 4> IP_SUBNET_MASK=255.255.255.0 (Or mask of the network) >rommon 5> DEFAULT_GATEWAY=192.10.10.20 >rommon 6> TFTP_SERVER=192.10.10.20 >rommon 7> TFTP_FILE=c3660-js-mz.120-7.XK2.bin..bin >rommon 8> tftpdnld > >It shld be thru. Syntax is key > >Uttam > >ss ss wrote: > >> Hi all!! >> In our 3660 cisco router IOS has got corrupted(FLASH IOS) & Iam not able to >> boot thro. ROM also (ROM BOOT not working).The only mode which is working >is >> ROMMON mode.When I try to load the IOS thro XMODEM I gt the following >> error(In ROMMON mode) >> >> rommon 1 > xmodem c3660-js-mz.120-7.XK2.bin..bin >> Do not start the sending program yet... >> File size Checksum File name >> 8059392 bytes (0x7afa00) 0x7520 c3660-js-mz.120-7.XK2.bin..bin >> >> WARNING: All existing data in flash will be lost! >> Invoke this application only for disaster recovery. >> Do you wish to continue? y/n [n]: y >> Ready to receive file c3660-js-mz.120-7.XK2.bin..bin ... >> BB0BB0 >> Timeout waiting for data - aborting download... >> rommon 2 > confreg 0x2101 >> >> rommon 3 > reset >> >> System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) >> Copyright (c) 1999 by cisco Systems, Inc. >> C3660 processor with 65536 Kbytes of main memory >> Main memory is configured to 64 bit mode with parity disabled >> >> loadprog: error - on read during ELF program load >> requested 10471860 (0x9fc9b4) bytes, got 8039940 (0x7aae04) >> boot: cannot load "flash:" >> >> System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) >> Copyright (c) 1999 by cisco Systems, Inc. >> C3660 processor with 65536 Kbytes of main memory >> Main memory is configured to 64 bit mode with parity disabled >> >> rommon 1 > b >> loadprog: error - on read during ELF program load >> requested 10471860 (0x9fc9b4) bytes, got 8039940 (0x7aae04) >> boot: cannot load "flash:" >> >> So as u see in the above output I hv tried XModem & also ROMboot but >without >> any success.Also I tried loading the backup of the IOS for 3660 which i >> had,thro. TFTP server by giving the following command >> >> b c3660-js-mz.120-7.XK2.bin..bin:192.10.10.20 >> >> where 192.10.10.20 is the address of the TFTP server but no use. >> >> If any one of u hv faced similar problem,Can u pl. mail the solution with >> detailed sequence of steps to solve it. >> >> Thanx & warm regards >> ss2001 > >[GroupStudy.com removed an attachment of type text/x-vcard which had a name >of umajumdar.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14926&t=14616 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
