Hi,
I have just acquired a 2nd user WIC-2T Card for my 3600 Router, but it does
not have the regular 60pin interfaces, which I was expecting to see.
Instead it has 2 x smaller, thinner female interfaces with 2 nuts on each
end for the cable connector to screw into.
The card is marked WIC 2T, and the two interfaces are labeled Serial 0 and
Serial 1.
Has anyone else seen this type of interface?
Can anyone give me a cisco part number for the type of cable I would need?
Will I be able to connect each of these connectors to a DCE/DTE crossover
cable to connect to a regular 60pin connector?
Is this normal or is this some special or new type of card?
Pls. let me know
Thanks
--
Rashid Lohiya
[EMAIL PROTECTED]
020 8509 2990
07785 362626
www.pioneer-computers.com
London UK
www.rashidl.co.uk
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14951&t=14951
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]