Hi
Yes that is what a WIC-2T is, nothing new or special about them. It uses the
smart serial interface. If you need cross-over or straight cables one place
you might look is www.pacificcable.com
HTH
--
John Hardman CCNP MCSE
""Rashid Lohiya"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I have just acquired a 2nd user WIC-2T Card for my 3600 Router, but it
does
> not have the regular 60pin interfaces, which I was expecting to see.
>
> Instead it has 2 x smaller, thinner female interfaces with 2 nuts on each
> end for the cable connector to screw into.
>
> The card is marked WIC 2T, and the two interfaces are labeled Serial 0 and
> Serial 1.
>
> Has anyone else seen this type of interface?
>
> Can anyone give me a cisco part number for the type of cable I would need?
> Will I be able to connect each of these connectors to a DCE/DTE crossover
> cable to connect to a regular 60pin connector?
>
> Is this normal or is this some special or new type of card?
>
> Pls. let me know
>
> Thanks
>
> --
> Rashid Lohiya
> [EMAIL PROTECTED]
> 020 8509 2990
> 07785 362626
> www.pioneer-computers.com
> London UK
>
> www.rashidl.co.uk
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=14957&t=14951
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
