Bruce,
This link should provide the info you need:
http://www.cisco.com/warp/public/110/atp52.html
There are more tips at:
http://www.cisco.com/warp/public/707/index.shtml
Bottom line,
You'll need a TACACS+ or Radius server to get started, you can't configure a
users list on the PIX as you can with the router. Everything else is fairly
straight-forward.
HTH,
Kent
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Bruce Williams
Sent: Sunday, August 05, 2001 1:37 AM
To: [EMAIL PROTECTED]
Subject: PIX and Lock and Key Dynamic Access-Lists [7:14937]
I want to know if it is possible to create Lock and Key Dynamic Access-List
on a PIX 520 Firewall. This is the problem I am trying to solve. We have a
R&D network that has confidential information which we need to keep isolated
from all of the users on our corporate network except for a few authorized
users. We have a PIX 520 between the two networks. A few authorized users
will need to be able to Telnet and FTP from the corporate network to this
restricted network. These authorized users do not have static addresses so I
cant filter them by IP address I need to be able to authenticate them by
username and password. I would like to configure a Lock and Key Dynamic
Access-list so that authorized users can log in to the PIX with their
username and password and then the Dynamic Access-List opens up the firewall
for them. I know Lock and Key (Dynamic Access-Lists) can be configured on
routers, but can they be configured on the PIX?
Bruce Williams
215-275-2723
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15037&t=14937
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
