Dear Makarand,
Yes i have made router 2 has Fr swicth , so dlci 11 can be swictched to bri
port of the router itself , now when i type the command show frame-relay pvc
, it shows dlci 11 as swicthed , on bri port of the router 2 it shows in
spoofing state but no lmi enq are recieved on this bri , i don't know why
?can you throw some light on this .If the lmi enquries are recieved at this
interface then only can these enquires can be send on bri port of router 1
once it dails into the bri port of router 2.So till the time lmi does not
come up , it won't help us .
Regards
Adarsh
----- Original Message -----
From:
To:
Sent: Tuesday, August 07, 2001 7:29 AM
Subject: Re: FR ON ISDN [7:15010]
> Dear Adarsh,
>
> I hope you are trying to aggragate multiple links at R2. One of the link
is from R1 over ISDN.
>
> As you have R2 connecting to FR switch all PVCs will terminate on R2. If
you want R2 to switch PVCs then it should be configured as a FR switch. Is
it that what you want to do?
>
> HTH
>
> -Makarand
>
> [EMAIL PROTECTED] wrote
> Dear ALL
>
> Can any one help me in knowing how does one configure Frame relay on ISDN.
>
> The picture is someting like this :
>
>
> router1(BRI)------------(BRI)router2(Serial)-------------FR Switch.
>
>
> Now there are 2 pvc from router 2 to fr switch , dlci 10 for the router 2
> itself & the dlci 11 for the bri port for router1. Now the Router2 is
> swicthing dlci 11 from the serail port to bri port itself.When ever
router
> 1
> dials it shd get this dlci from bri port of router 2. Can any one help
me
> what config does one needs to do on the bri part of router 1 & router 2.
>
>
>
> Thanks
> Regards
> Adarsh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15073&t=15010
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
