That being said, (this is new config to me) LMI is a poirt to point beast.
Each FR switch that has a UNI interface (interface to an end router) will
generat it's own LMI type and information regarding DLCI's announced. On
R2's BRI interface, did you use the commands "frame-relay intf-type DCE"
and " frame-relay LMI type [cisco or ANSI]. When the link comes up by
either side. It should go through the frame layer 2 negotaition.
I am pulling out all of this out of my butt this late at night, but it
makes sense. Are there special commands for this type of frame over ISDN
setup?
Tony M.
#6172
(who woke up in the middle of the night and is typing with one eye closed :)
----- Original Message -----
From: "Chuck Larrieu"
To:
Sent: Monday, August 06, 2001 10:25 PM
Subject: RE: FR ON ISDN [7:15010]
> As I live and breathe....
>
> MANAGER(config)#int bri 3/0
>
> MANAGER(config-if)#encap ?
> cpp Combinet proprietary protocol
> frame-relay Frame Relay networks
>
> I apologize for my sarcastic remark earlier. Learn something new every
day.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Adarsh
> Sent: Monday, August 06, 2001 10:00 PM
> To: [EMAIL PROTECTED]
> Subject: Re: FR ON ISDN [7:15010]
>
>
> Dear Makarand,
>
> Yes i have made router 2 has Fr swicth , so dlci 11 can be swictched to
bri
> port of the router itself , now when i type the command show frame-relay
pvc
> , it shows dlci 11 as swicthed , on bri port of the router 2 it shows in
> spoofing state but no lmi enq are recieved on this bri , i don't know why
> ?can you throw some light on this .If the lmi enquries are recieved at
this
> interface then only can these enquires can be send on bri port of router 1
> once it dails into the bri port of router 2.So till the time lmi does not
> come up , it won't help us .
>
>
> Regards
> Adarsh
> ----- Original Message -----
> From:
> To:
> Sent: Tuesday, August 07, 2001 7:29 AM
> Subject: Re: FR ON ISDN [7:15010]
>
>
> > Dear Adarsh,
> >
> > I hope you are trying to aggragate multiple links at R2. One of the link
> is from R1 over ISDN.
> >
> > As you have R2 connecting to FR switch all PVCs will terminate on R2. If
> you want R2 to switch PVCs then it should be configured as a FR switch. Is
> it that what you want to do?
> >
> > HTH
> >
> > -Makarand
> >
> > [EMAIL PROTECTED] wrote
> > Dear ALL
> >
> > Can any one help me in knowing how does one configure Frame relay on
ISDN.
> >
> > The picture is someting like this :
> >
> >
> > router1(BRI)------------(BRI)router2(Serial)-------------FR Switch.
> >
> >
> > Now there are 2 pvc from router 2 to fr switch , dlci 10 for the router
2
> > itself & the dlci 11 for the bri port for router1. Now the Router2 is
> > swicthing dlci 11 from the serail port to bri port itself.When ever
> router
> > 1
> > dials it shd get this dlci from bri port of router 2. Can any one help
> me
> > what config does one needs to do on the bri part of router 1 & router
2.
> >
> >
> >
> > Thanks
> > Regards
> > Adarsh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15084&t=15010
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
