Anytime a node connected to that port is shutdown or rebooted you will get
this. If you are having problems with a node that is not doing this. Check
cisco's web site certain type of nic cards dont work with the 10/100
modules. We had the problem and just changed out the node's nic and
everything was fine. You could also just manually put both the port and nic
card speed and duplex mode in manually and see if that works.
-----Original Message-----
From: Wilson, Bradley [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 8:25 AM
To: [EMAIL PROTECTED]
Subject: RE: Cat 6.5K error messages [7:15250]
I thought these messages appeared whenever a station joins or leaves the
switch - are you sure someone isn't just rebooting their PC?
-----Original Message-----
From: Patrick Donlon [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 08, 2001 7:33 AM
To: [EMAIL PROTECTED]
Subject: Cat 6.5K error messages [7:15241]
I have a cat' that is giving me these messages on the console:
06:02:18 MET +02:00 %PAGP-5-PORTFROMSTP:Port 8/48 left bridge port 8/48
06:02:35 MET +02:00 %PAGP-5-PORTTOSTP:Port 8/48 joined bridge port 8/48.
>From the CCO I've read that it could be a duplex mis-match, faulty NIC,
cable or mis-configuration.
How can I find out from the switch stat's which is most likely?
cheers Pat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15303&t=15250
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
