Hi Mike, Are there any references out there on the net on setting this up? Our PIX IOS version is 5.0. I've been using the VPN Client v1.0.a succesfully, but it's not Win2K compatible. Thanks, Jose Villatoro -----Original Message----- From: Yonkerbonk [mailto:[EMAIL PROTECTED]] Sent: Monday, August 20, 2001 1:34 AM To: [EMAIL PROTECTED] Subject: RE: VPN to PIX using Win2000 or Millennium?? [7:16452] I have PPTP running fine with Win2K. I had it working on 5.3 and am now running 6.1. I recently upgraded to DES but haven't tried using IPSec. Michael Le, CCIE #6811 --- Rik Guyler wrote: > Yes, PIX supports PPTP acording to CCO. However, I > became frustrated with > PPTP as each version of Windows offers different > options and interacts with > the PIX in a different manner. In other words, I > have set this up and made > it work most of the times I tried, but this one > time, in band camp.... > > Now, my experience is with the 5.x code and maybe, > just maybe, it's better > with the 6.x code as this now seems to be the trendy > way to provide remote > access. Despite this, I really recommend purchasing > the VPN client. The > 100-user license retails for around $250. > > BTW - It used to be that the PPTP configs for the > PIX on CCO were flawed. > Maybe this is still the same, maybe not. > > --- > Rik Guyler > > -----Original Message----- > From: Andy [mailto:[EMAIL PROTECTED]] > Sent: Saturday, August 18, 2001 6:48 AM > To: [EMAIL PROTECTED] > Subject: VPN to PIX using Win2000 or Millennium?? > [7:16452] > > > Hi > > Does anyone know if it is possible to set up a VPN > using either Windows 2000 > or Millennium to connect to a corporate PIX without > using any Cisco client > software? > > I believe it is possible but haven't had any luck in > getting it to work. > > I have it working great using NT with the Cisco > Secure VPN client, which > unfortunately doesn't run on the newer versions of > Windows. I've also been > told this is because the newer versions of Windows > don't need it as they > have this capability built in. > > I've done the usual setting up the VPN part on > Windows but to my mind there > seems to be a lot of options missing that would > allow you to get it to work > properly, such as ESP and AHP settings, etc. > > Any help would be greatly appreciated. > > Andy [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16556&t=16452 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
