It was my understanding that a fastethernet interface on 2620's and higher
platforms running a minimum of ip plus feature pack is required to trunk
vlans. Are you by chance routing between vlans on your 2610 with an ethernet
interface using secondary addresses? I'd be interested to know.
Thank you,
MikeN
""Dwayne Saunders"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Yes it will I am using a 2610 to route between 4 vlans and a 2621 to route
> between 15 different vlans in our test environment
>
> D'Wayne Saunders
> Network Admin
>
>
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 11:54
> To: [EMAIL PROTECTED]
> Subject: What Router for Routing Between VLANS [7:16609]
>
>
> I have lent out my CCNP books & do not remember all the router models that
> can
> route between VLAN's. I currently have a 4700M doing the job, but wanted
to
> know if a 2600 would route them.
>
> Thanks
> Phil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16615&t=16609
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
