Yes, that is the fact according to mine too, however, if you look here, it
should be possible.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/hw_in
st/nm_inst/nm-doc/connteth.htm#34411
Watch for word wrap.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 10:40 AM
To: [EMAIL PROTECTED]
Subject: RE: What Router for Routing Between VLANS [7:16609]
This really confuses me because according to the Cisco products
reference guide, there is no FastEthernet module available for the 2600
series. It says that if you need fastethernet on a 2600 you need to get
a 2620 or better. A 2610 has a single 10baseT port.
Are you doing ISL or 802.1q with the IP only feature set?
Please clear this up for me. I wonder if Cisco has introduced a new
module and it's just not in this guide? I'll have to check CCO for
that.
Thanks,
John
>>> "Dwayne Saunders" 8/21/01 8:41:32 AM
>>>
Very strange I have a fast Ethernet module in a 2610 and it works and I
am
only using the ip feature set
so I don't know what the story is there
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
****************************************************************************
***********************************************
This email message (and attachments) may contain information that is
confidential to Lasseters Online. If you are not the intended recipient
you
cannot use, distribute or copy the message or attachments. In such a
case,
please notify the sender by return email immediately and erase all
copies
of the message and attachments. Opinions, conclusions and other
information
in this message and attachments that do not relate to the official
business
of Lasseters Online are neither given nor endorsed by it.
****************************************************************************
***********************************************
-----Original Message-----
From: EA Louie [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 16:10
To: [EMAIL PROTECTED]
Subject: Re: What Router for Routing Between VLANS [7:16609]
any router that supports VLAN trunking (802.1q or ISL). The 2600 does
if
equipped with a fastethernet interface.
see http://www.cisco.com/warp/public/473/50.shtml (I it got using a
search
for intervlan routing)
which indicates the minimun router is the 2620
----- Original Message -----
From: "Circusnuts"
To:
Sent: Monday, August 20, 2001 7:23 PM
Subject: What Router for Routing Between VLANS [7:16609]
> I have lent out my CCNP books & do not remember all the router models
that
> can
> route between VLAN's. I currently have a 4700M doing the job, but
wanted
to
> know if a 2600 would route them.
>
> Thanks
> Phil
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16683&t=16609
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
