Doh! I didn't have routing enabled- packets had no path to travel. =) Enabling a routing protocol fixed everything.. Sean ""Sean Knox"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello all, I'm having some trouble with a Route Switch Module on a Catalyst > 5500. I have set up an IP on the vlan1 interface on the RSM. On the same > subnet, I am able ping hosts from the RSM, but I cannot ping the RSM > interface from the gateway, or any other hosts for that matter. Can any > help? > > My config: > Building configuration... > > Current configuration: > ! > version 11.2 > no service udp-small-servers > no service tcp-small-servers > ! > hostname Router > ! > boot config slot0:config > ! > no ip domain-lookup > ! > interface Vlan1 > ip address 10.10.190.198 255.255.255.0 > ! > ip default-gateway 10.10.190.1 > ip classless > ! > line con 0 > line aux 0 > line vty 0 4 > logging synchronous > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16778&t=16778 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]