In our lab, we have a few different devices, 1600, 2600, 3500, and you
can't talk to any of them from new 866 Compaq EN deskpros, it just
doesn't work. Plug the cable into the back of my old trusty Compaq
Armada laptop, no problems. I haven't bothered to troubleshoot it.
Symon
-------------------
> i Had this happen to me.
>
> My symptoms were you could execute the break sequence but the rest
of the
> keyboard is unresponsive.
> whether trying to break into the router or normal console as i could
see the
> boot up sequence when reset.
>
> This happened with 2 of my routers.
>
> So i used another computer and was able to console in with no
problems.
>
> i put it down to my serial ports or UARTS on the serial ports of the
PC had
> gone
> on the blink.
>
> Just something weird to note for further use.
>
>
>
> > -----Original Message-----
> > From: Richard Chang [SMTP:[EMAIL PROTECTED]]
> > Sent: Wednesday, 22 August 2001 2:58 pm
> > To: [EMAIL PROTECTED]
> > Subject: Help! Locked out of my 7513 Router! [7:16769]
> >
> > Dear Cisco Groupstudy Person:
> > I locked myself out of my Cisco 7513 router somehow.My Keyboard
has no
> > effect. I'm not sure if this is the reason, but my most recent
> > configuration
> > change was to fill the No. 4 slot, previously blank, with a Fast
Ethernet
> > Card.
> > Everytime I power cycle the router, it comes up again, goes
through the
> > boot sequence, and then freezes with a string of messages
concerning the
> > status of FE 3/0 and FE 4/0, first stating that they are up and
then
> > stating
> > they are down.
> > Even the password recovery technique where one uses the "Break"
or "^["
> > Keys and then resets the Config Register can't be used. For some
reason,
> > the
> > keyboard won't even work; it has no effect in this situation
suddenly!!.
> > I have carefully checked my Hyperterminal settings of 9600 baud
; Data
> > bits=8 Parity=none stop bits=2 Flowcontrol=none
> > Anybody have any idea why my keyboard is "dead" I am working
with Vlan
> > configurations on this Router. Please help! Thank you.
[EMAIL PROTECTED]
>
Cheers,
Symon
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16779&t=16769
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
