I haven't upgraded. I have only been working with cisco stuff for 3 months
so I'm kind of new to this and passing my CCNA didn't do me much good with
this problem.
This is the version. I think its current:
Cisco-2948GL3#sh ver
Cisco Internetwork Operating System Software
IOS (tm) L3 Switch/Router Software (CAT2948G-IN-M), Version 12.0(7)WX5(15a)
RELEASE SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Thu 06-Jan-00 18:31 by integ
Image text-base: 0x60010928, data-base: 0x605A0000
ROM: System Bootstrap, Version 12.0(7)W5(15) RELEASE SOFTWARE
""Tony Medeiros"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Last time I looked it up, Unless software has changed, the 2948G-L3 only
> supported standard access-lists.
> I could be wrong, did you try upgrading software ?
> Tony M.
>
> ----- Original Message -----
> From: "sam sneed"
> To:
> Sent: Wednesday, August 22, 2001 7:42 AM
> Subject: access-lists supported on 2948G-L3? [7:16810]
>
>
> > I was trying to set up accesslists on an interface on a 2948G-L3 switch
> last
> > night for an hour to no avail. The switch showed my access-list when
doing
> a
> > sh ip int fa47 and the list was correct. I even applied a new list
stating
> > only deny ip any any. Traffic still came through . It was applied
> correctly
> > as inbound as well. I did show logging and saw:
> >
> > 45w4d: ACL card not present for interface FastEthernet47
> > 45w4d: %SYS-5-CONFIG_I: Configured from console by vty0 (172.16.10.100)
> > 45w4d: %SYS-5-CONFIG_I: Configured from console by vty0 (172.16.10.100)
> > 45w4d: ACL card not present for interface FastEthernet47
> > 45w4d: %SYS-5-CONFIG_I: Configured from console by vty0 (172.16.10.100)
> >
> > It looks like I need and ACL card. I never heard of this, has anyone
else?
> > This is an $8000 switch capable of CEF, MLS and a while bunch of other
> > features.
> > Please don't tell that with all these features it can't do access-lists
as
> > is. Its classified as a distrubution layer switch, where ironically
Cisco
> > says to put your access-lists in their design model and I can't seem to
> get
> > it going.
> >
> > any help would be appreciated...
> >
> >
> > sam sneed
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16819&t=16810
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]