Use policy routing:
int s0
ip policy route-map TEST
route-map TEST permit
match ip address 1
set ip next-hop (your host IP)
access-list 1 permit any
Cheers,
YY
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Leonardo Toco
Sent: Wednesday, August 22, 2001 11:23 PM
To: [EMAIL PROTECTED]
Subject: Command to route directly to host [7:16820]
Hi, I need your help !!!
I need to set a router to route all the incoming in a determined serial to a
specific host and not to a router port, this host is a proxy and all the
packets should go there.
Maybe there is a simple command but I really dont know.
Can you guys helpme ?
Thanks a lot.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16836&t=16820
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
