Maybe try adding:
boot system flash file.bin
to the config file.
Just a shot.
Maybe someone else may have a better anwser
- mike dye -- Open Domain Service - www.ods.org -
On Wed, 22 Aug 2001, Sean Knox wrote:
> Hello all,
>
> I recently erased a flash card and reloaded an IOS image on a 7500 (RSM
> in a Catalyst 5500). After booting that image, I then issued a
> "config-register " to set the config register to the value specified
> in show versions. Yet, every reboot, the router loads in rommon mode and I
> need to boot the image manually. What else do I need to configure?
>
> Sean
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16894&t=16890
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
