We have a Pix firewall that is serving as a default gateway to the Internet
as well as providing ipsec tunnel connectivity to several remote offices for
serveral hosts on a subnet. On the same subnet we have a 2600 providing a
point to point wan link. I added a route to the Pix on the inside interface
to point to the 2600 for the wan route. I am still not able to connect to
that subnet unless i add a specific route on the hosts. When running debug
logging on the Pix I get the following output:
106011: Deny inbound (No xlate) icmp src inside:10.111.1.55 dst
inside:10.112.3.3 (type 8, code 0)
Any thoughts?
Bob Nawrocki
CCNP CCDP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17242&t=17242
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
