only one route is allowed..
Best Regards
Have A Good Day!!
*******************************************
Farhan Ahmed*
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network Engineer
Mideast Data Systems Abudhabi Uae.
*******************************************
Privileged/Confidential Information may be contained in this message or
Attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
Conclusions and other information in this message that do not relate to the
Official business of this company shall be understood as neither given nor
Endorsed by it.
> -----Original Message-----
> From: Bob Nawrocki [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, August 25, 2001 8:30 PM
> To: [EMAIL PROTECTED]
> Subject: Pix Route issue [7:17242]
>
>
> We have a Pix firewall that is serving as a default gateway
> to the Internet
> as well as providing ipsec tunnel connectivity to several
> remote offices for
> serveral hosts on a subnet. On the same subnet we have a 2600
> providing a
> point to point wan link. I added a route to the Pix on the
> inside interface
> to point to the 2600 for the wan route. I am still not able
> to connect to
> that subnet unless i add a specific route on the hosts. When
> running debug
> logging on the Pix I get the following output:
>
> 106011: Deny inbound (No xlate) icmp src inside:10.111.1.55 dst
> inside:10.112.3.3 (type 8, code 0)
>
> Any thoughts?
>
> Bob Nawrocki
> CCNP CCDP
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of Farhan Ahmed.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17293&t=17242
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
