Hi stephen,
You can use tacacs if you want to authenticate
the users accessing your routers .You can get the log also.You can download
the same from www.navya.com
I don't have idea about kerboros ...
In my setup tacacs is working fine
thanks
ramesh
On Fri, 24 Aug 2001 Stephen Skinner wrote :
>Hello,
>
>i don`t mean to be rude ....but i think the reason the
>gentleman replyed the
>way he did was because way you posed your question was
>to say
>
>" i`m to busy ...you lot do it for me"
>
>now i personal believe that that is not the case and
>you were simply asking
>(as i do all the time) for some assistance in this
>subject matter.
>
>unfortunatly i don`t have an answer to your question
>but also require info
>on tacacs+....so please don`t be afraid to pass on what
>you may learn
>
>
>Kindest Regards
>
>
>steve
>
>
>>From: "khramov"
>>Reply-To: "khramov"
>>To: [EMAIL PROTECTED]
>>Subject: Re: Tacacs [7:17110]
>>Date: Fri, 24 Aug 2001 10:58:12 -0400
>>
>>As far as I know this is Cisco newsgroup and it should
>be used for
>>technical
>>discussions
>>not for personal insults. If you think that you are
>smarter than me or
>>have
>>better work
>>habits that is fine, I am not going to argue with
>that. Otherwise I would
>>be asking
>>questions.
>>
>>Donald B Johnson jr wrote:
>>
>> > After someone gives you an answer, are you going to
>have time to
>>research
>>if
>> > it is a good solution for you or are you going to
>just implement it.
>> > It sure must warm the cockles of your supervisors
>heart if he could see
>>you
>> > now.
>> > actually the only two things that would make me to
>busy that I couldn't
>> > research an access solution would be;
>> > A raging blaze
>> > A Seinfeld rerun
>> > don
>> >
>> > ----- Original Message -----
>> > From: "khramov"
>> > To:
>> > Sent: Friday, August 24, 2001 6:17 AM
>> > Subject: Tacacs [7:17110]
>> >
>> > > Hi,
>> > > Just like everyone else sometimes I do not have
>enough time to do the
>> > > research myself and I post questions here. Here
>is what I am trying
>>to
>> > > do: I am trying to set up some sort of security
>server on my network
>>to
>> > >
>> > > authorize user access on routers and switches.
>First of all what
>>should
>> > >
>> > > I use Tacacs (extended or +), Radius, Kerberos,
>which one seem to work
>> > > better. Second where can I buy/download the
>software or can I just
>> > > configure a router as a Tacacs server. Just give
>me some ideas on
>>this.
>> > >
>> > > Thanks a lot,
>> > > alex
>________________________________________________________-
>_________
>Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
>110
>--------------------------------------------------
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to
>[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17369&t=17110
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
