This might be a stupid question, but are you sure you have the right
bootrom's for your 2501?
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Rik Thomas [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 11:38 AM
To: [EMAIL PROTECTED]
Subject: Re: 2501 boot rom replacement [7:17405]
On Mon, 27 Aug 2001, John Neiberger wrote:
> How positive are you that they are in the correct slots? I know since
> these are in order from left to right it would be hard to mess up, but
> not impossible. On other 2500 models they are more confusing, but not
> on the 2501. As long as from left to right you have FW1 and then FW2
> you should be just fine.
I checked it more than twice. Even had the book out just to make sure, I
tried two other chips that I had received today as well.
>
> Are they inserted all the way, flush into their mounts? I've had
> situations where they weren't quite seated correctly and this caused
> some problems. I really don't know what else could be causing this
> except perhaps you fried your router with static electricity. ;-)
> Let's hope that's not the case.
>
I don't think I fried the router, the old chips still work just fine, they
are just too old to "recognize" the IOS I want to use. I know it should
be very easy, that is what is bothering me. I doubt they could have sent
me two sets of bad roms. I am going to try the new ones in some other
routers I have to make sure. This is a pretty old router, but it should
still work.
> Good luck, and I'm sorry I couldn't be of more help...
>
Thanks for the reply, I appreciate it.
> John
--
Rik Thomas
[EMAIL PROTECTED] http://SmartBackups.com
Is your Website Smart? Automated Website backups. Free 30Day trial!
Ph: 302.672.7314 Fx: 302.672.7315 ICQ: 879956
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17412&t=17405
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]