Is there a way that I can cause a BRI interface to activate when the load drops to 0 on the T-1 and then deactivate when there is activity on the T-1. I have a point to point from DE to AZ with constant traffic and I have seen where an interface will not transmit traffic even though it is being reported as up and the DDR int never activates. I cannot use a load-threshold and everything you learn about DDR states how to do this when the traffic reaches a certain climax and how to disconnect when it falls under specs and I would like to do this but also in that when ther traffic hits 0 it can activate as well. Any suggestions, please. I am kind of a newbie at setting up DDR and any help would be gfreatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17419&t=17419 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]