It's the Versatile Interface Processor option. These are used for local
processing in the 75xx routers & I are much the same theory as a CAM
(Carrier Access Module) in the LS1010's. If you have a VIP installed the
actual processing takes place on the shelf (locally). Port adapters slide
into the VIP, giving you local processing of say a FE, ATM, or even an
Encryption accelerator. The best example I can think of is with ATM. There
was a module installed a couple of years ago called an AIP. The AIP was the
ATM Interface Processor. It took up the entire shelf & used the 75xx's back
plane to connect to the RSP (Route Switch Processor). When the VIP's were
released, you then could save your RSP processes by using a VIP & an ATM PA
(port adapter). Basically- the VIP & RSP upgrades have extended the 75xx's
shelf life.
Make any sense ???
All the best
Phil
----- Original Message -----
From: "Hyde, Lori"
To:
Sent: Wednesday, August 29, 2001 8:10 PM
Subject: VIP [7:17775]
> Hi All,
> I've seen this acromym described as a "Versatile Interface Processor" and
> as a "Virtual IP". What is it "really"?
> And when and where is it used?
>
> Thanks!!
> Lori
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17793&t=17775
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
